|
Product SPEC BEHRINGER Power Amplifier EP2000
- เพาเวอร์แอมป์ BEHRINGER EP2000
- OUTPUT POWER STERO MODE
- 8 ohm 350 Watts RMS (per channels driven)
- 4 ohm 500 Watts RMS (per channels driven)
- 2 ohm 650 Watts RMS (per channels driven)
- Output power bridge mono mode
- 8 ohm 1000 Watts RMS (per channels driven)
- 4 ohm 1300 Watts RMS (per channels driven)
- สเปก เพาว์แอมป์ BEHRINGER EP2000
- Distortion: <0.01%
- Frequency Response:
- At 10dB below rated output Power-20Hz–20kHz,
- At -3dB points-5Hz–50kHz
- Damping Factor: >300 at 8Ω
- Noise: -100dB unweighted, 20Hz–20kHz
- Voltage Gain: 40X (32dB)
- Input sensitivity: 1.15V (+3.4dBu) VRMS at 8Ω
- Input impedance: 10kOhm unbalanced, 20kOhm balanced
- Controls:
- Front: Power switch,gain control (channels 1 and 2)
- Rear: DIP switches (10x)
- Indicators:
- Power: Green LED
- Clip: Red LED, 1 per channel
- Signal: Yellow LED, 1 per channel
- Inputs: Balanced XLR and 1/4\" TRS connectors
- Outputs: Touch-proof binding posts and professional speaker connectors
- Cooling: Continuously variable-speed fan, back-to-front airflow
- Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
- Load Protection: Turn on/off muting, AC coupling
- Output Circuit Type: Class H complementary linear output
- Mains Voltage/Breaker:
- 100-120V, 50/60Hz, 15 amps
- 220-230V, 50/60Hz, 8 amps
- Power Consumption: 1600W
- Mains connector: Standard IEC receptacle
- Dimensions: 19W x 3.5 H x 15.8 D inch
- Weight: 15.7 kg
อาจเกิดความผิดพลาดจากการบันทึกข้อมูลกรุณาตรวจสอบกับทางผู้ผลิตของสินค้านั้น หรือดูจากโบว์ชัวร์ (PDF File)ในหน้ารายละเอียดสินค้านี้ |